Moto Vert Rack

$329.00

The all new 2×2 Cycles Vert Rack provides an entirely new reimagining of how we carry our bicycles on our motorcycles. Born out of a desire to be able to run to the trails on extended trips with both our bicycle and our top box, the Vert Rack came into focus. Now being able to go on multi-day adventures with all of your gear is possible; a goal of ours we have always wanted to achieve. In order to accomplish this, we had to completely change how we’ve looked at mounting our bicycles.

The Vert Rack breaks down into four components. You have the Main Arm, which is where your bicycles rear tire sits in the cradle. Next you have the Inner Extension Arm. This arm telescopes vertically in the mid section to lower or raise how far off the ground your bicycle rests. At the top, the new fork tower telescopes horizontally to accommodate nearly any style of bicycle and is where you will be mounting your front fork. Off to the side in the middle of the Vert Rack is the new Wheel Holder. This Wheel Holder is unique in that it too telescopes in and out to adjust how far your front tire is from your bicycle. In addition to this, the Wheel Holder can also be mounted on the right or left, up or down, left or right. We wanted to be able to offer ultimate adjustability so the Vert Rack will suit your unique style without any compromises! 

Once loaded with your front wheel locked in place on the storage arm, you’ll be able to have access to your top box (provided it has a mounting plate that mounts on top of the 2×2 Cycles base rack) mounted on your moto for all the gear you need. 

The Vert Rack is handmade in our shop just like all of our racks and fits to the very same base plates we’ve always used. This means if you already have one of our racks and want to switch it up to the Vert Rack, you don’t need to buy a whole new base plate! You can still use your existing one! Just order the Vert Rack arm and enjoy the plate you already have! 

Tons of time and engineering went into the design of the Vert Rack to ensure it lives up to the same standards we strive to achieve with all of our products. Backed by our Lifetime Guarantee, we believe and stand by the Vert Rack to live up to all the challenges and thrills we subject ourselves to out on the road. Don’t just let your motorcycle do more, let yourself do more! 

No clamping to the bicycle frame

Your bicycles rear tire rests safely in the cradle at the bottom of the Vert Rack. The front fork of your bicycle locks into the telescoping fork tower at the top of the vert rack. This allows for maximized adjustability for various bicycles without any worries of compromising any part of the bicycle itself!

Fully Adjustable

Telescoping Fork Tower, Inner Extension Arm, and Wheel Holder Arm provide extensive adjustability to support nearly all bicycles. Make the Vert Rack your own and mount your bicycle in the best way for you! Every part of the Vert Rack was designed to be adjustable so you could decide how you wanted your bicycle to best be mounted.

Vast Moto Support

Our custom made racks can be installed on almost any motorcycle. Honda, Kawasaki, Yamaha, KTM, BMW, Harley Davidson, the list goes on. We've been doing this for years and want everyone to enjoy their moto more than they already do. If you're unsure, give us a call or send us an email. We'd be more than happy to work with you and make sure you can make the most of your moto!

Handmade in the United States

It's not about where it's made, but about being made with our hands where we live. So we can oversee every aspect of its design, dependability, and utility. Need an adjustment? Call us. We can make it because we are hands on with every single rack that leaves our shop. And not only that, but our racks are backed by our Lifetime Guarantee! We've got you covered because we believe in them for life.